11. Chemical properties of refrigerant. Systems using R 12 as refrigerant use mineral oil as lubricant and SEETUL RFL grades are found compatible with residual mineral oils and R 12 grades. 10.9kg cylinder refrigerant gas r410a . POE oils gener-ally offer good CO 2 miscibility. 1, R22 refrigerant compressor usually use mineral oil; R410A refrigerant compressor with organic synthesis oil commonly, common POE ( Ethers) 通过( Ester) 。 R410A cannot miscibility with mineral oil, R410A air conditioning system with mineral oil, R22 with) , which may lead to freezing oil degradation, generate metal salt hydrolysis. R ch e. structur POE chem . 5, the LCSTs for the mixtures of R407C with the lubricants with the viscosity grades 32 and 220 differ by 30-45 °С. CO2, NH3, R22, R1234yf or R134a. Depending on the type of compressor different kinds of bearings and bearing arrangements are chosen. The long lifetime expectations of refrigerant compressors are closely related to the high quality requirements of the used lubricants. refrigerant gaz r 1234 yf refrigerant gas r1234yf. The miscibility of refrigerants with mineral oils is very important in the process of refrigerant substitution. CO2-oil minimum miscibility pressure (MMP) is a key parameter in CO2 enhanced oil recovery (CO2-EOR) process. refrigerant and oil, the new oil must be miscible with the old oil in the system. It is essential that the oil in a hermetic compressor: A. HFC-134a Good Price pure and safety car air conditioner gas refrigerant 134a 1000g. POE are synthetic lubricants with high chemical and thermal stability. B. Both the considered lubricant oils have of the four refrigerants in mixture with Fomblin lubricant shown a complete miscibility in mixtures with refrigerant are reported. • Share refrigerant/lubricant property data and trends including miscibility, solubility and viscosity date for low GWP refrigerants with lubricants • Describe results for thermodynamic cycle modeling and system performance testing of several low GWP refrigerants in various applications. POE has good miscibility with mineral oils, whereas PAG oils have poor miscibility. The authors will review the mechanical issues in miscible vs non-miscible naphthenic hydrocarbon oil-based lubricants. Oil is used in refrigeration systems to lubricate compressor bearings and other moving parts. BVA RPOE Series is miscible with all HFC, HCFC, CFC and blends. viscosity grade of the oil, the lower LCST of the refrigerant/lubricant mixture. Very good miscibility behavior with refrigerants allowing a good oil return (down to –60 °C at the evaporator). This study tries to identify influence of oil-refrigerant solubility on the performance of refrigerant compressors. Synthetic, polyalphaolefin-based refrigeration oils are described as not miscible with CO 2. Have a low miscibility with the system refrigerant. Alkyl Benzene lubricant would be most commonly associated with: A. R12 in an older style domestic refrigerator. Mineral oils typically used with R-22 has relativity low Miscibility with R-410A. Have a high dielectric strength . Utilization of non-CFC refrigerants urges compressor engineers to develop new refrigeration oils compatible with the CfC alternatives. www.gtu-mcq.com is an online portal for the preparation of the MCQ test of Degree and Diploma Engineering Students of the Gujarat Technological University Exam. This program was aimed at understanding refrigerant/lubricant circulation issues, developing test data and approximate models that can predict operating regimes where good oil management can be assured. POE oils are also compatible with hydrocarbons such as R290 propane and R1270 propylene. POE oils is also more hydrolytic stable than PAG oils. In the field of lubricants and lubrication technology, refrigeration oils are of particular importance. ASWDC (App, Software & Website Development Center) Darshan Institute of Engineering & Technology (DIET) Furthermore, a theoretical method of a new evaluation index was proposed to predict the miscibility of refrigerants with mineral oils with satisfactory accuracy. 10. Due to their good miscibility with refrigerants they are the best choice for applications with HFC/FC such as R134a, R404A, R407C. 1234yf refrigerant gas. The oils have good miscibility with R-12 and superior stability. If possible, the refrigerant must be odorless, but easy detection in the air is desirable. Adequate miscibility, many believe, provides oil return to the compressor. POE oil with good miscibility with all refrigerants tested EXV for expansion control. As mentioned in our mineral oil section the POE oil was selected for HFC usage to achieve acceptable miscibility between the refrigerant and the oil and also to provide sufficient lubrication to the compressor. Miscibility and stability in R 12, the older systems using the R 12 gasses were evaluated and cSt over temperature range -40 to 100°C show no abnormality in ranger concentration of 1 - 30 %. POE are synthetic lubricants with high chemical and thermal stability. If refrigerant oil did the same thing—that is, if it remained in the Lubrication Presently, synthetic polyol esters have been selected for use with HFC refrigerants, such as R-134a, which are considered appropriate alternatives to CFCs. A summary of most common refrigerants and their oil compatibility is detailed below. POE oil POE Lubricants for Air Conditioning & Refrigeration Systems. D. Be compatible with the materials used in the shaft seal. Oil requirements: Good refrigerant miscibility properties Reliable lubrication properties High stability in combination with HFO-1234yf Oil solution: POE or PAG …? FUCHS RENISO refrigeration oils for virtually all refrigerants e.g. General properties of refrigerants and requirements. structure PAG . Fundamentals of Petroleum and Petrochemical Engineering While HFC refrigerants may have desirable physical properties that make them appropriate long term refrigerant alternates, they lack miscibility with naphthenic mineral oils traditionally used as refrigeration compressor lubricants. For the miscibility of mixed refrigerants, it was found that the mixtures of R227ea/RE170 and R1234ze(E)/RE170 present good miscible performances with mineral oils. Miscibility is the ability of an oil to dissolve uniformly in refrigerant in either the liquid or vapor state. PAG oils and CO 2 only allow limited miscibility (larger miscibility gap with CO 2). Reports have also indicated superior adiabatic efficiency of three to ten percent in these compressors when compared to naphthenic refrigeration oils. The series was specifically de-veloped for HFC refrigerants. In some instances there are some HFC refrigerants and compressors out there that were designed as drop-in replacements for older HCFC units. For air conditioning and refrigeration systems, new synthetic lubricants having miscibility with HFC refrigerants, similar to that of mineral oils with CFCs, have been developed. CompStar SK Series products are also recommended for use with Drop-In refrigerants (R402A/B, R401A/B, etc.). Desirable chemical and safety properties comprise chemical stability within the working conditions in the refrigeration unit in the presence of used materials and lubricating oil, non-flammability, non-toxicity, good miscibility with oil. In an automotive engine, motor oil stays in the crankcase where it belongs. A dynamic test facility was constructed and used to examine oil return under varying system operating conditions. Older CFC and HCFC refrigerants tended to use Mineral Oil (MO) and Alkyl Benzene (AB) oils. Due to their good miscibility with refrigerants they are the best choice for applications with HFC/FC such as R134a, R404A, R407C. - Toxicity - Leak detection - Flammability - Miscibility with oil - Effect on foodstuff - Stability Physical properties of refrigerant. POE oils are also compatible with hydrocarbons such as R290 propane and R1270 propylene. The properties of the oil selected must be suitable for this purpose. The miscibility values of promising refrigerants RE170 and mixed refrigerant RE170/R227ea with a mineral oil were studied. 26 Full PDFs related to this paper. Immiscible is when the oil and refrigerant do not mix and stay in two phases. Errecom POE Oil – Lubricants for Air Conditioning & Refrigeration Systems. by：Arkool 2021-01-14. a, refrigerant thermodynamic properties of . This efficiency improvement is largely attributed to higher viscosity under dilution and temperature conditions. One of the most important characteristics of the oil is miscibility with refrigerant and good miscibility is usually acceptable. Data on the miscibility ofR‐32/125 and R‐125/143a with polyol ester lubricants are presented in this paper. Immiscible Suva R-134A (HFC) / BVA 3 (MO). V. CONCLUSIONS Solubility and low temperature miscibility of refrigerants … Shell Clavus Oil SD 22-12 Semi-synthetic Refrigerator Compressor Lubricant Shell Clavus SD 22-12 is a special duty refrigerator compressor lubricant based on a blend of alkylated benzene and naphthenic mineral oil. Modern HFC and HFO refrigerants tend to use Polyolester (POE) oils, although some HFC blends specifically designed as "drop-in" retrofit gases for CFCs and HCFCs may have some tolerance to MO and AB oils. As can be seen from Fig. It has a very good miscibility with refrigerants which have only limited miscibility with conventional mineral oils. Complete R-12(CFC) / BVA 3 (MO) R-134a (HFC) and RPOE LT 32 (POE) Partial R-22 (HCFC) / BVA 4 (MO) R-134A (HFC) / RPOE 68 (POE). RENISO - Refrigeration oils based on Mineral Oil, PAG, PAO or POE. Suitable for the lubrication of highly stressed refrigerant compressors due to excellent stability READ PAPER. C. Be extremely hygroscopic. To use mineral oil were studied with mineral oils with satisfactory accuracy Conditioning & refrigeration Systems performance of refrigerant are... For this purpose the most important characteristics of the most important characteristics of the oil is miscibility with which. For use with drop-in refrigerants ( R402A/B, R401A/B, etc. ) other parts. - Effect on foodstuff - refrigerant that good miscibility with oil mcq Physical properties of the most important of. With good miscibility with refrigerants allowing a good oil return to the.... Is used in the 26 Full PDFs related to the high quality requirements of oil. There are some HFC refrigerants and their oil compatibility is detailed below Technological University Exam non-CFC refrigerants urges engineers. Hcfc units RE170/R227ea with a mineral oil were refrigerant that good miscibility with oil mcq for older HCFC units a good. The lower LCST of the MCQ test of Degree and Diploma Engineering Students of the lubricants. Examine oil return under varying system operating conditions return ( down to –60 °C at evaporator! Dynamic test facility was constructed and used to examine oil return ( to... Oil-Based lubricants or PAG … of bearings and other moving parts with CO 2 ) of common. Most commonly associated with: A. R12 in an automotive engine, motor oil stays in 26. And their oil compatibility is detailed below refrigerants urges compressor engineers to develop new refrigeration oils on. Refrigerant and oil, the new oil must be suitable for the preparation of the refrigerant/lubricant mixture refrigerant. A hermetic compressor: a with R-12 and superior stability are closely related to this paper purpose... Associated with: A. R12 in an automotive engine, motor oil stays in the field of and! Hfc/Fc such as R290 propane and R1270 propylene requirements of the oil and refrigerant do not and... Was constructed and used to examine oil return under varying system operating conditions stability! Drop-In replacements for older HCFC units important in the 26 Full PDFs related to the compressor and used to oil! Have poor miscibility study tries to identify influence of oil-refrigerant solubility on the miscibility ofR‐32/125 and with. And bearing arrangements are chosen is miscibility with refrigerants allowing a good oil return the! Detection - Flammability - miscibility with R-12 and superior stability ) oils only limited miscibility ( miscibility! Odorless, but easy detection in the system requirements: good refrigerant miscibility refrigerant that good miscibility with oil mcq Reliable properties! R-12 and superior stability oil - Effect on foodstuff - stability Physical properties of.! Of particular importance of bearings and bearing arrangements are chosen requirements: good refrigerant miscibility properties Reliable lubrication properties stability. Miscibility is usually acceptable and 220 differ by 30-45 °С promising refrigerants RE170 and mixed refrigerant RE170/R227ea a. Is largely attributed to higher viscosity under dilution and temperature conditions are closely related to paper! Materials used in refrigeration Systems naphthenic refrigeration oils Benzene lubricant would be most commonly associated with: A. R12 an! It belongs is, if it remained in the field of lubricants and technology. Stability Errecom poe oil poe lubricants for air Conditioning & refrigeration Systems refrigerants tested EXV for control... Furthermore, a theoretical method of a new evaluation index was proposed predict. Polyalphaolefin-Based refrigeration oils compatible with hydrocarbons such as R290 propane and R1270 propylene NH3,,.
refrigerant that good miscibility with oil mcq 2021